FD26 Forged Matte Dark Bronze
鍛造一体型 / FORGED 1-PIECE
CLEAN, NO-NONSENSE, READY TO PARTY. Built for the harshest line on the trail and the cleanest spot at cars & coffee. Same forged T6061 build as the BL79, without the beadlock ring.
FINISH:
Single billet, 1-piece
Pressed at 10,000 to 12,000 tons
Tested to SAE J2530 (US off-road wheel safety standard)
Limited lifetime structural warranty
6x139.7
4Runner
FJ Cruiser
GX
Tacoma
Questions about fitment?
Contact support@rpm-garage.com
Pickup available at 119 West Walnut Avenue
Usually ready in 2-4 days
FD26 Forged Matte Dark Bronze
6x139.7 | 17x8.5" | -10mm Offset
119 West Walnut Avenue
119 West Walnut Avenue
Monrovia CA 91016
United States
Interest-free payment plans from Shop Pay.
Limited lifetime structural warranty, and 14 day returns.
鍛造一体型 The FD26 is forged from a single billet of T6061 aluminum under 10,000 to 12,000 tons of pressure. The forged grain structure runs continuous, which makes the wheel lighter at the same strength, more resistant to crack propagation, and better at handling fatigue over time.
Frequently asked questions
Forged wheels are pressed from a single billet of aluminum under 10,000 to 12,000 tons of force. Cast wheels are poured into a mold. The forged grain runs continuous, so a forged wheel of the same strength weighs less, resists cracking under hard impact, and handles fatigue better over time.
SAE J2530 is the US off-road wheel safety standard. Every reputable American wheel maker uses it to validate impact, fatigue, and load. Every HDR wheel passes the test before it ships.
No. The FD26 is a 1-piece forged wheel. For low-PSI rock work, look at the BL79 forged beadlock. The FD26 is built for overland, daily, and trail use without aired-down rock crawling.
Yes, in three offset options: -10mm, -20mm, and -38mm. Offset choice depends on your suspension, tire size, and how aggressive a stance you want.
1,200 kg (2,640 lb) per wheel. Plenty for a fully loaded overland 4Runner or Tacoma build.
You're responsible for confirming correct wheel sizing before purchase.
Returns must be requested within 14 days, unused and in original packaging (wheels cannot have been mounted or installed); a 20% restocking fee applies, shipping is non-refundable. See full Refund Policy.
Questions about fitment? support@rpm-garage.com